How Did I Solve Wifi Problem On Ubuntu 16.04 For Lenovo Z580

-
All problems started after I update my Ubuntu 16.04 LTS and wifi driver has gone.  I spent so many times to solve this problem. Actually there is no problem. There is  driver more than one.

After I update Ubuntu I realized, update that I did, installs an other driver of broadcam. That new wifi driver installation caused the wifi problem.

As the result, all you need this command :

sudo apt purge bcmwl-kernel-source

That command will remove broadcam installation which had been installed by update.

Lastly...

Reboot your system :

sudo reboot

That's it. Now, Everything could be okay. This method solved to my problem. I hope, it will also be useful for you.

Comments

Post a Comment

Popular posts from this blog

How To Solve Class Not Found Problem in OMNeT++

-
Image
If you are new to Omnet, it is possible to do some mistakes when you are coding your first program. I used to TOSSIM for some months, then I have started to use Omnet. When I am coding my first program on Omnet, I got this problem at first start to simulating code : Error in module (omnetpp::cModule) ag (id=1) during network setup: Class "blogkafem" not found -- perhaps its code was not linked in, or the class wasn't registered with Register_Class(), or in the case of modules and channels, with Define_Module()/Define_Channel(). At first you suppose this problem caused by linked problem of Eclipse ( it is avaible and default omnet editor ). Almost, all of the web sites are focusing on this sitution to solve this problem ( you probably know, if you had searched on google ). This approach is prettym much correct. In this article, I focused an other reason which is caused this problem. For example, we assume, our code is like this in the .NED file: simple blog...
Read more

OMNeT Installation Problems And Solutions in Ubuntu

-
When I am trying to install Omnet++ 5.3 on Ubuntu 16.04 After I type " make " on terminal, I was getting this errors : cdynamicexpression.cc: In function ‘intpar_t omnetpp::safeAdd(intpar_t, intpar_t)’: cdynamicexpression.cc:389:42: error: ‘__builtin_add_overflow’ was not declared in this scope if (__builtin_add_overflow(a, b, &res)) ^ cdynamicexpression.cc: In function ‘intpar_t omnetpp::safeMul(intpar_t, intpar_t)’: cdynamicexpression.cc:401:42: error: ‘__builtin_mul_overflow’ was not declared in this scope if (__builtin_mul_overflow(a, b, &res)) ^ Makefile:100: recipe for target '/opt/omnetpp-5.3/out/gcc-release/src/sim/cdynamicexpression.o' failed make[2]: *** [/opt/omnetpp-5.3/out/gcc-release/src/sim/cdynamicexpression.o] Error 1 make[2]: *** Bitmemiş işler için bekliyor.... Makefile:117: recipe for target 'sim' failed make[1]: *** [sim] Error 2 Makefile:28: recipe for target 'allmodes' failed make: *** [allmodes] Error 2...
Read more